-
$528.22KX/F 125/250/250F/450 "2016" Rear Axle. These rear axles are shot peened and heat treated to a Min. UTS 160Ksi. for...
-
$456.06CR/F 125-450 "2002-2024" Swing Arm Pivot. These swingarm pivots are shot peened and heat treated to a Min.UTS 160Ksi....
-
$420.15P/N: SHF2714 is a Titanium swingarm pivot that is a direct replacement for the stock swingarm pivot. It has been hard...
-
$72.12Titanium Hex Flange Nut M20 - 1.50 Thread Pitch. These are a machined hex flange nut made from grade 5 titanium. The...
-
$61.73M12-1.25 x 2.165" overall legth caliper mounting pin, Micro Polished, PVD CrN Hard Coated
-
$53.58M8-1.25x 2.030" overall length caliper mounting pin, Micro Polished, PVD CrN hard coated.
-
$47.74M8-1.25x1.625" overall length caliper mounting pin, Micro Polished, PVD CrN Hard Coated.
-
$27.84Banjo Bolt M8-1.25 x21mm Titanium. This is for YZ250F engine oil Lines. The head is drilled for safety wire. Min UTS...
-
$27.75Titanium Hex Flange Nut M22 - 1.50 Thread Pitch. These are a machined hex flange nut made from grade 5 titanium....
-
$24.84KX250F/KX450F titanium front fender bolt. this is a direct replacement for the oem front fender bolt.
-
$23.11Aluminum Brake Banjo Fits single Banjo fitting. Color Blue. Thread Size 10mm, Thread pitch 1.25, Length 21mm. These...
-
$23.11Aluminum Brake Banjo Fits single Banjo fitting. Color Gold. Thread Size 10mm, Thread pitch 1.25, Length 21mm. These...
-
$23.11Aluminum Brake Banjo Fits single Banjo fitting. Color Black. Thread Size 10mm, Thread pitch 1.25, Length 21mm. These...
-
$23.11Aluminum Brake Banjo Fits single Banjo fitting. Color Red. Thread Size 10mm, Thread pitch 1.25, Length 21mm. These...
-
$21.17Titanium Hex Flange Nut M16 - 1.50 Thread Pitch. These are a machined hex flange nut made from grade 5 titanium....
-
$20.58This bolt has several oil galleys in it for oil/fluid applications. The head has been drilled for safety wire. Min....
-
$20.58Banjo M10-1.25 x 19mm Titanium Gr5
-
$17.71Domed Titanium Flush Head M8 - 1.25 X 28mm. Accepts a 6mm hex key. Grip Length = 13mm. Thread Length = 15mm. The...
-
$17.22This pin is a direct OEM replacement for YZs and RMs. These pins are for the large bikes only!!! Min UTS 140Ksi...
-
$14.72Titanium Lower Rear Fender Bolt Fits 2016- KX250F/450F. Has a flnge diameter of 18mm and uses a 10mm Hex wrench,...
-
$14.69Titanium KX250F/450F Seat Bolt This is the shouldered M8 Seat bolt for the 2016- KX250F/450F. It has a bullet nose...
-
$13.90This bolt is a direct OEM replacement for the KX series Rear Brake Rotor Bolt. The applications for this bolt apply...
-
$13.27Titanium Hex Flange Head M12 - 1.25 X 28MM. Grip Length = 4MM. Thread Length = 24MM. The heads have been forged and...
-
$12.87Titanium Hex Head M8 - 1.25 x 55mm. Grip Length = 0. Thread Length = 55mm. The drive on this bolt is a 10mm Hex....
KX85